Backup of the REVISION BIOS settings
ASUS ROG BIOS Settings Guide
This guide is primarily intended for ASUS ROG BIOS but can serve as a reference for other BIOS settings. It aims to improve latency, performance, and overclocking capabilities.
Note: Me or the REVISION team are not responsible for any damage that may occur to your PC. Proceed at your own risk.
Tools
- Setup Animator: Disabled
- Asus Armory Crate: Download and install the Armory Crate app. DISABLE.
Boot Configuration
General Settings
- Fast Boot: Enabled (Disable if it affects USB port connectivity)
- Boot Logo Display: Auto (3-7 sec)
- Boot up NumLock State: Enabled
- Above 4G Decoding: Disabled
- Wait For ‘F1’ If Error: Enabled
- Option ROM Messages: Disabled
- Interrupt 19 Capture: Disabled
- Setup Mode: Advanced Mode
- AMI Native NVMe Driver Support: Off (On, if using NVMe SSD)
CSM (Compatibility Support Module) Configuration
- UEFI (GPT): Recommended
- Launch CSM: Disabled
- UEFI/CSM (GPT/MBR): Compatibility
- Launch CSM: Enabled
- Boot Device Control: UEFI and Legacy OPROM
- Boot from Network Devices: Ignore
- Boot from Storage Devices: Ignore
- Boot from PCI-E/PCI Expansion Devices: UEFI driver first
- Legacy (MBR): Usually for older systems
- Launch CSM: Enabled
- Boot Device Control: Legacy OPROM only
- Boot from Network Devices: Ignore
- Boot from Storage Devices: Ignore
- Boot from PCI-E/PCI Expansion Devices: Ignore
Secure Boot
- OS Type: Other OS
Key Management
- PK Management: Delete key
- KEK Management: Delete key
- DB Management: Delete key
- DBX Management: Delete key
Boot Option Properties
- Boot Option #1: (Select your main OS drive)
Advanced Settings
CPU Configuration
- Hyper-Threading: Enabled (Recommended for CPUs with less than 6 cores)
- Pros:
- Best for rendering and processing
- Better streaming capabilities
- Newer technology
- Cons:
- Slightly worse latency
- Higher CPU temperatures
- Lower FPS in some games
- Prone to stuttering
- Hyper-Threading Example: Battlefield multiplayer games benefit from Hyper-Threading Enabled.
- Pros:
- Thermal Monitor: Disabled
- Active Processor Cores: All
- Intel Virtualization Technology: Disabled (Needed for 64-bit Virtual Machines)
- Hardware Prefetcher: Enabled
- Adjacent Cache Line Prefetch: Enabled
- Boot performance mode: Max Non-Turbo Performance
- SW Guard Extensions (SGX): Disabled
- Tcc Offset Time Window: Disabled
CPU - Power Management Control
- Intel(R) SpeedStep(tm): Enabled
- CPU C-States: Disabled
- CFG Lock: Disabled
- Intel(R) Speed Shift Technology: Disabled
- Execute Disable Bit: Disabled
Platform Misc Configuration
- PCI Express Native Power Management: Disabled
PCH - PCI Express
- PCI DMI ASPM: Disabled
- ASPM: Disabled
- L1 Substates: Disabled
- PCI Express Clock Gating: Disabled
SA - PCI Express
- DMI Link ASPM Control: Disabled
- PEG - ASPM: Disabled
System Agent (SA) Configuration / Memory Configuration
- VT-d: Disabled
- Memory Remap: Enabled
Graphics Configuration
- Primary Display: PEG
- iGPU Multi-Monitor: Disabled
DMI/OPI Configuration
- DMI Max Link Speed: Gen3
PEG Port Configuration
- PCIE_X16/X8_1 Link Speed: Gen3
- PCIE_X8_2 Link Speed: Gen3
- PCIE Spread Spectrum Clocking: Disabled
PCH Configuration
- PCIe Speed: Gen3
- IOAPIC 24-119 Entries: Enabled
PCH Storage Configuration
- Hyper kit1 Mode: (Disable if you don’t have one)
- SATA Controllers: Enabled
- SATA Mode Selection: AHCI
- S.M.A.R.T. Status Check: Disabled
- Aggressive LPM Support: Disabled
- Hot Plug: (Disable on all drives)
Thunderbolt(TM) Configuration
- Thunderbolt(TM) Support: (Disabled if unused)
- Thunderbolt(TM) PCIe Support: (Disabled if unused)
PCH-FW Configuration
- PTT Configuration
- TPM Device Selection: dTPM
- PTP Aware OS: PTP Aware
Onboard Devices Configuration
- HD Audio Controller: (Disable if using USB audio, otherwise leave Enabled)
- DVI Port Audio: Disabled
- PCI-EX16_3 Bandwidth: x4 Mode
- M.2 Configuration: PCI mode
- Hyper M.2 x16: Disabled
- USB Power Delivery in Soft Off State (S5): Disabled
- Asmedia USB 3.1 Controller: Enabled
- Intel LAN Controller: Enabled
- Intel LAN PXE Option ROM: Disabled
- Connectivity Mode (Wi-Fi & Bluetooth): Disabled
- Wi-Fi: Disabled
- Bluetooth: Disabled
- Serial Port: Disabled
APM Configuration
- ErP Ready: Enable(S4+S5)
- Restore AC Power Loss: Power Off
- Power On By PS/2 Keyboard: Disabled
- Power On By PCI-E/PCI: Disabled
- Power On By Ring: Disabled
- Power On By RTC: Disabled
PCI-E Subsystem Settings
- SR-IOV Support: Disabled
Network Stack Configuration
- Network Stack: Disabled
USB Configuration
- Legacy USB Support: Disabled (Enable this to install Windows in legacy MBR with USB)
- USB Keyboard and Mouse Simulator: Disabled
- XHCI Hand-Off: Disabled
Extreme Tweaker
- ASUS Multicore Enhancement: Enabled (Use OFF if you’re doing a manual overclock)
Internal CPU Power Management
- Intel SpeedStep: Disabled
- Turbo Mode: Enabled